Specifications of AG-Xplus table-top type

Specifications of AG-Xplus table-top type

* LCD touch panel, laptop PC, and table are optional.

* Table used in image is not a Shimadzu product.

Installation Space

(Dimensions given for left, right, and back of main unit are required for maintenance.)

Installation Space

Model Weight
(approx. kg)
Power Requirements Value in ( ) indicates power consumption Installation Environment
AG-10NX to 10kNXplus 153 Single phase 100 to 110/115 to 130/220 to 230/240 V (switching system) 50 to 60 Hz, 1.5 kVA (450 W) Temp.: 5 to 40 °C 
Humidity: 20 to 80 % (no condensation)
Voltage fluctuation: ±10 % max. 
Vibration: Frequency 10 Hz max., amplitude 5 mm max.
AG-20/50kNX/50kNXDplus 261 Single phase 200 to 230 V, 50 to 60 Hz, 5 kVA (1.2 kW)

AG-Xplus Specification

Table-Top Type AG-Xplus

*1: Crosshead speed precision is calculated using crosshead transfer amount within a specified period of time for

   the crosshead speed of 0.5 mm/min to 500 mm/min under normal conditions.

*2: Tensile stroke is the value used when attaching the MWG(non-shift wedge type)grips.

   Stroke can be extended.

   Values under 5kN are with SCG(screw type flat)grips attached.

*3: JIS B7721, EN 10002-2, ISO 7500-1, and ASTM E4 standards recommend re-verification after installation of

   testing machine.

*4: The LCD touch panel(optional)is required for Dataletty(optional).

*5: Dateletty(optional)and TRAPEZIUM X operational software cannot be used together.

Values in this table have been measured based on separately-approved test standards.

This page may contain references to products that are not available in your country.
Please contact us to check the availability of these products in your country.

Top of This Page